A.J.Antunes 9210826 매뉴얼 - 페이지 8

{카테고리_이름} A.J.Antunes 9210826에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A.J.Antunes 9210826 20 페이지. Club toaster

페이지 인쇄

CLUB TOASTER CTX-200L

PLTN

Light

PLTN

MOTOR

ADJUST

PRGM

BELTS

STOP/START

Figure 6. Adjusting Toasting Quality

Viewing the Program Mode Settings

Follow these steps to view these settings:

1. From the Ready or Wait modes, press and hold

the PRGM button for 3 seconds.

2. The following appears on the display:

Program Club

Press Select

3. If desired, use the NEXT or PREV button to scroll

through the following categories:

• Speed

• Units (F/C) (default setting is F)

• Top Temp

• Bottom Temp

4. When the desired category is reached, press

the SELECT button ONCE. This will cause the

selected category value to blink indicating it is in

edit mode.

NOTE: The current setting will be the FIRST setting

shown in the display.

5. Press the PREV or NEXT buttons while the value

is blinking to change adjust the setting.

Note: Do NOT change any of these settings for ANY

reason! For assistance in changing these options,

please call the factory.

6. When you are finished viewing settings, press the

PRGM button to return to the Ready screen or

wait 10 seconds until the Ready screen appears.

NOTE: The unit will exit the Program Mode after 10

seconds of inactivity.

OPERATION (continued)

Buns

Dark

SELECT

Club Toaster Settings

The following table describes the recommended Club

Toaster operating settings.

Setting

Bottom Temp. (Lower

Platen)

Top Temp (Upper Platen)

Speed (22 seconds)

NOTE: If you wish to change any of the above set-

tings, contact the factory for instructions.

CT Unit Status Mode

This mode provides feedback on unit performance. No

adjustments can be made in this mode. Also, the dis-

play remains on the selected screen in this mode until

you switch screens or exit the Unit Status mode.

Follow these steps to view the Unit Status mode:

1. From any operation mode (Ready or Wait) press

and hold the ADJUST button for 3 seconds.

2. The following appears on the display in sequence:

Speed-Motor-Set Pt

•

Total Hours

•

Controls Temp (Air temperature inside the

electrical enclosure)

•

Top Temp (Actual temperature and set point

temperature)

•

Bottom Temp (Actual temperature and set

point temperature)

•

Smart Kitchen

Network Not Detected

Value

570°F (299°C)

1700

P/N 1010993 Rev. H 03/15

McDonald's