Fencee mini DUO MD10 사용자 설명서 - 페이지 10

{카테고리_이름} Fencee mini DUO MD10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fencee mini DUO MD10 16 페이지.

8. CONTROL

POWER SWITCHING – ON/OFF SWITCH BUTTON

The large switch button is used for basic control. This button turns the energizer on and off

and it can be used to activate the Power save mode, i. e. to extend the interval between pulses.

After switching off and then switching on, the energizer remembers the last set power.

IN SWITCHED-OFF CONDITION OF THE ENERGIZER

long press of button (>2 s)

short press of button

IN SWITCHED-ON CONDITION OF THE ENERGIZER

long press of button (>2 s)

save mode (approximately 2x longer delay) – selectable by the user, for

example if it is necessary to save the battery

short press of button

9. EXPLANATION OF THE LED INDICATOR SIGNALS

LIGHT/FLASHING

FLASHING

It signals the operation and flashes in interval of the individual pulses.

RAPID DOUBLE FLASHING (red)

The battery voltage has dropped below 12 V.

RAPID SHORT FLASHING (red)

The energizer is switched off and the battery voltage is lower than 11,4 V.

COLOR

Blue

Operation in normal mode.

Purple

Power save mode, extended time between pulses.

Red

Indicates warning and error condition (for example battery voltage drop below 12 V)

or a fence voltage drop below 2.5 kV.

When the battery voltage drops below 11,6 V, a warning siren (beeping) is switched on. If the

voltage drops below 11,4 V, the fence system switched off. The Energizer will only flash rapidly

red and will not give an impulse. The reason is to protect the battery from deep discharge

(battery destruction).

switching energizer on.

no reaction.

manual switching between basic and Power

turning off the energizer.