DexWeb Telecom VOIP-9001 Http 설정 매뉴얼 - 페이지 13
{카테고리_이름} DexWeb Telecom VOIP-9001에 대한 Http 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DexWeb Telecom VOIP-9001 19 페이지.
DexWeb Telecom VOIP-9001에 대해서도 마찬가지입니다: 사양 및 설치 매뉴얼 (7 페이지)
페이지 인쇄VOIP-9001 SIP Phone Http Setup Guide (V1.42)
● nat addr: When "nat traversal" is set to "enable", please put the
domain name of the servers ( These web server helps to find out the
public
IP
www.whatismyip.com.
When "nat traversal" is set to "stun", please put the URI of the stun
server into "nat addr", in the format as "domain name/IP address : service
port". The default service port for stun is 3478.
● nat ttl: When IP phone sit behind a NAT device, it will send packets to
server every "nat ttl" seconds to keep the port mapping on the NAT
device alive. "nat ttl" is an integer between 10 and 65535, default value
is 20.
● phone number: The local phone number or username of this phone,
usually is allocated by system.
● account: With SIP system which requires authentication, please put the
username/account into this field.
● pin: With SIP system which requires authentication, please put the
password into this field.
● register port: The local UDP port registered with server to accept
incoming handshaking messages. The default port number is 5060.
of
the
NAT
device)
into
"nat
addr",
such
as
13