AB Quality 2727-G7P20D1Q6 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} AB Quality 2727-G7P20D1Q6에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AB Quality 2727-G7P20D1Q6 20 페이지.

Emergency Stop Switch

The emergency stop switch of the MobileView terminal meets the requirements of

EN 418. It must be designed as an emergency stop of category 0 or category 1 (see

EN 60204-1, chapter 9.2.5.4.2) on the basis of the risk assessment for the machine.

The connection of the positive-break contacts to an appropriate monitoring system

must meet the safety category which is defined by means of the risk assessment (in

accordance with EN954-1) of the machine.

The emergency stop has 2, potential-free, normally closed contacts for connecting

external peripherals, a nominal operating voltage of 24V (Safety Extra Low Voltage

in accordance with EN 61131-2 and EN 50178), and a maximum operating current

of 500 mA.

ATTENTION

Risk Assessment of Machinery

For the risk assessment, the following standards must be applied:

• EN 292-1 "General principles for design of machinery"

• EN 1050 "Principles for risk assessment of machinery"

• EN 954-1 "Safety-related parts of control systems"

• ANSI/RIA 15.06-1999 "American National Standard for Industrial Robots and

Robot Systems - Safety Requirements (Section 9)"

• ANSI B11.TR3-2000 "Risk Assessment and Risk Reduction - A guide to estimate,

evaluate and reduce risks associated with machine tools"

The safety categories (B, 1, 2, 3, 4) define the structure of safety-related parts of a

machine and are derived from this risk assessment.

Page 9 shows how the enabling function of the MobileView terminal meets safety category 3

using a PILZ PST 1 safety control relay. Please keep in mind, that the entire concept of the

machine must be layed out accordingly.

• When the emergency stop switch is not wired into the

emergency stop circuit, the MobileView terminal must be

stored where it is not available to operators.

Consider that the operator might instinctively activate the

nearest emergency stop in case of danger. This could have

fatal consequences if the emergency stop does not

function.

• Emergency stop functions must remain operational in all

operating modes. Resetting an activated emergency stop

must not result in uncontrolled startup of machines or

installations.

• The emergency stop switch does not replace other safety

devices.

MobileView Guard G750

Publication 2727-QS002E-MU-P