AB Sciex API 3200 System 하드웨어 매뉴얼 - 페이지 7

{카테고리_이름} AB Sciex API 3200 System에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AB Sciex API 3200 System 20 페이지. Fully-integrated triple quadrupole mass spectrometer

페이지 인쇄

passing through Q2 the ions enter Q3 for additional filtering, and then enter the

detector. In the detector, the ions create a current that is converted into a voltage

pulse. The voltage pulses leaving the detector are directly proportional to the

quantity of ions entering the detector. The instrument monitors these voltage

pulses and converts the information into a signal. The signal represents the ion

intensity for a particular m/z and the instrument displays this formation as a mass

spectrum. For more information, see the following figure,

path.

Figure 1-2 Ion optics path

The API 3200 system uses the Turbo V ion source to produce ions from liquid

samples. The Turbo V source can use either the TurboIonSpray probe or the APCI

(atmospheric pressure chemical ionization) probe. The instrument is configured to

perform complex MS/MS analysis, but for less rigorous analytical requirements it

can perform single MS scans.

Parts of the Instrument

This section contains diagrams of the instrument and general descriptions of the

main components.

Integrated

Switching

Valve

Integrated

Syringe

Pump

Figure 1-3 Front view

Document Number: D1000092204 B

Curtain Plate

DP (Orifice)

Skimmer

EP (Q0)

RO1 (Q1)

IQ1

CUR (Curtain Gas™ flow)

Ion Source

Front View

RO2 (Q2)

RO3 (Q3)

LINAC

IQ2

IQ3

Collision

Cell

Mass Spectrometer

Hardware Guide

Figure 1-2 Ion optics

DF (Deflector)

Detector