AB Sciex API 5000 LC/MS/MS 하드웨어 매뉴얼 - 페이지 14
{카테고리_이름} AB Sciex API 5000 LC/MS/MS에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AB Sciex API 5000 LC/MS/MS 16 페이지.
페이지 인쇄
System Overview
Turbo V™ Ion Source Settings
Table 1-2
parameters. For more information, see the Turbo V™ Ion Source Operator's
Guide.
Table 1-2 Vertical and Horizontal Parameters
X-axis
Y-axis
Compound Parameters
In general, you can use the preset values for most of the parameters in
For more information about the parameters, see the Analyst
system.
Table 1-3 Compound Parameters
CAD Gas
DP (Declustering Potential)
EP (Entrance Potential)
CXP (Collision Cell Exit
Potential)
CE (Collision Energy)
IE1 (Ion Energy 1) — For
experienced instrument
operators only
IE3 (Ion Energy 3) — For
experienced instrument
operators only
Related Documentation
The guides and tutorials for the instrument and the Analyst software are installed
automatically with the software and are available from the Start menu: All
Programs > AB SCIEX. A complete list of the available documentation can be
found in the online Help. To view the Analyst software Help, press F1.
Technical Support
AB SCIEX and its representatives maintain a staff of fully-trained service and
technical specialists located throughout the world. They can answer questions
about the instrument or any technical issues that may arise. For more information,
visit the web site at http://www.absciex.com.
14
shows the recommended starting values for the X- and Y-axis
Parameter
Parameter
Value
5
5
Use the preset value and optimize for your
compound.
Use the preset value and optimize for your
compound.
Use the preset value.
Use the preset value and optimize for your
compound.
Use the preset value and optimize for your
compound.
Do not adjust.
Do not adjust.
Document Number: D1000092206 B
Table
software Help
®
Value
1-3.