Avocent DSR Series DSR1030 펌웨어 릴리스 노트

{카테고리_이름} Avocent DSR Series DSR1030에 대한 펌웨어 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Avocent DSR Series DSR1030 3 페이지. Avocent dsr series dsr1030: install guide
Avocent DSR Series DSR1030에 대해서도 마찬가지입니다: 하드웨어 사양 (2 페이지), 릴리스 노트 (3 페이지), 펌웨어 릴리스 노트 (3 페이지), 펌웨어 릴리스 노트 (3 페이지), 펌웨어 릴리스 노트 (3 페이지), 릴리스 노트 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (8 페이지)

This document outlines:

1. Update Instructions

2. Appliance Firmware Version and Language Support Information

3. Enhancements

4. Fixes

5. Known Issues

6. Flash Update Failure Recovery

=============================================================

Please refer to your user manual for detailed instructions to update the

appliance.

Important Note:

1. If the appliance currently has a firmware version earlier than 3.2.0.17 (or

3.6.2.17 for DSR 1020, DSR 2020, or DSR 4020 switches) then the

appliance must first be upgraded to 3.2.0.17 (or 3.6.2.17 for DSR 1020,

DSR 2020, or DSR 4020 switches) before it can be updated with this

newest version.

2. Attaching the DSRIQ-VMC module to a Windows target may require the

USB CCID driver to be installed. If the user is prompted by the Windows

'New Hardware Wizard' the 'Next' button should be pressed.

3. For Avocent Power Management Distribution Units (PM™ 2003, 2006,

2024, 3003, 3006, and 3024 PDUs), PDU v110 firmware or higher is

required to be able to manage the PDU from a DSR switch.

DSR® x02x/x03x Switches

Firmware Release Notes

Version 3.7.0.13

Oct 28, 2008

Update Instructions