Avocent DSR Series DSR1031 펌웨어 릴리스 노트 - 페이지 3

{카테고리_이름} Avocent DSR Series DSR1031에 대한 펌웨어 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Avocent DSR Series DSR1031 3 페이지. Dsr series
Avocent DSR Series DSR1031에 대해서도 마찬가지입니다: 릴리스 노트 (3 페이지), 펌웨어 릴리스 노트 (3 페이지), 펌웨어 릴리스 노트 (3 페이지), 펌웨어 릴리스 노트 (3 페이지), 릴리스 노트 (3 페이지), 보충 설명서 (2 페이지), 릴리스 노트 (2 페이지), 빠른 설치 매뉴얼 (8 페이지), 빠른 설치 매뉴얼 (8 페이지)

6. Resolved issue where characters were dropped when typing extremely fast. The switch now

supports typing at up to 1800 characters per minute.

7. Resolved issue where portions of the DSR switch's Avocent-proprietary SNMP MIB were readable

via an SNMP walk utility. The entire Avocent-proprietary MIB is now only accessible via DSView 3

software.

=============================================================================

This release contains no known issues.

=============================================================================

If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch

is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:

1. Set up the TFTP server with server IP address 10.0.0.3.

2. Rename the flash update file to the appropriate filename from the following list and place it into the

appropriate directory on the TFTP server.

DSR1021, DSR1022

DSR1024

DSR1031

DSR1020, DSR2020, DSR4020

DSR8020

DSR1030, DSR2030, DSR4030, DSR8030

DSR2035, DSR8035

3. If the DSR switch is not on, turn it on now.

4. The recovery process will start automatically.

NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the

Internet that you can download and install.

Known Issues

FLASH Update Failure Recovery

Switch

Filename

DSR1021.fl

DSR1024.fl

DSR1031.fl

DSRxx20.fl

DSR8020.fl

DSRxx30.fl

DSR8035.fl