aqua greek products F-PPP2-G 매뉴얼 - 페이지 3

{카테고리_이름} aqua greek products F-PPP2-G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aqua greek products F-PPP2-G 10 페이지.

Portable Pro Pool 2 Assembly Instructions (Weight Plates)

1. Using a 7/16" wrench, remove the four (4) nylock nuts and at washers that are currently

holding the hood onto the platform. These were installed strictly for shipping purposes and

can be thrown away. Remove the hood and set aside.

2. Begin stacking the eleven (11) supplied weight plates on the portable platform. To ensure

proper alignment, slide the hood over the stack every three (3) or four (4) plates. Continue

this until all eleven (11) weight plates are in place.

3. Using a 7/16" wrench, slide the hood over the stack of weight plates and attach to the

platform using the twelve (12) supplied 1/4" nylock nuts and at washers. NOTE: Be sure to

use silicone to seal the fl ange before bolting together.

BALLAST COVER

WEIGHT PLATES (11)

1/4 FLAT WASHERS (12)

1/4 NYLOCK NUTS (12)

TOOLS REQUIRED:

• 7/16" wrench

Revised 7/28/20