Avocent SwitchView 사용자 설명서 - 페이지 8
{카테고리_이름} Avocent SwitchView에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avocent SwitchView 17 페이지. Kvm switching solutions from your desktop
Avocent SwitchView에 대해서도 마찬가지입니다: 설치 관리자/사용자 설명서 (17 페이지), 사양 (4 페이지), 빠른 설치 매뉴얼 (8 페이지), 빠른 설치 매뉴얼 (2 페이지)
페이지 인쇄
SwitchView
User Manual
6
Scanning PCs
The scanning feature allows you to automatically moni-
tor, or scan, each PC in your SwitchView system. If you
use the keyboard during scanning, the scan will pause
until you finish, then resume with the next PC. The
length of time each PC's video remains on the screen, or
dwell time, can be changed at any time. Scanning will
be halted if the Halt command is entered or if another
PC is selected.
The following key sequences control scanning:
Key Sequence
<CTRL><CTRL>Dnn<Enter>
<CTRL><CTRL>SG<Enter>
<CTRL><CTRL>SH<Enter>
If you would like mouse and keyboard activity to sus-
pend scanning, see the commands below.
Key Sequence
<CTRL><CTRL>M+<Enter>
<CTRL><CTRL>M-<Enter>
Key Sequence
1. <CTRL><CTRL>D10<Enter>
2. <CTRL><CTRL>SG<Enter>
3. <CTRL><CTRL>SH<Enter>
Action
Configures the dwell time. Substitute nn
with a value from 2 to 60 seconds. The
default value is 5 seconds.
Enables the scan Go command.
Enables the scan Halt command.
Action
Mouse will suspend scanning.
Mouse will not suspend scanning. (default)
EXAMPLE
Action
Each PC's video will remain on the
screen for 10 seconds before the
next channel is displayed.
Scanning begins with the current
computer, then continues to the
next PC in sequence.
Scanning is halted until the Go
command is issued again.