Aqua Leak Detection Aqua-L1 매뉴얼 - 페이지 13

{카테고리_이름} Aqua Leak Detection Aqua-L1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Leak Detection Aqua-L1 20 페이지. Multi-sensor acoustic pipe leak detector

AQUA-L SERIES MANUAL

Multi-Sensor Acoustic Pipe Leak Detector

AQUA-L7

•

In the suspected leakage area, start detection from the ﬁrst point, and click any

position in the spectrum bar the signal value will be displayed on the top of the

spectrum bar.

Note:

The thin bar on the right of the spectrum bar shows the instantaneous noise

of the environment, while the thick bar is the sound from below the surface area.

Observe the thick bar signal.

•

After the thick bar is stable, click any position in the spectrum bar to lock it again,

the signal value changes from red to black, and the detection at the ﬁrst point is

completed.

•

The same method is used to compare diﬀerent points in this area. When the

detection point has the highest thick spectrum bar, and the signal value is the

largest, this can be concluded as the suspected leaking point.

Note:

The detection report in the locating mode can be stored on your computer by

clicking on the "Export" button.

AQUA-L7