Avocent LongView 5000 series 설치 관리자/사용자 설명서 - 페이지 11
{카테고리_이름} Avocent LongView 5000 series에 대한 설치 관리자/사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avocent LongView 5000 series 16 페이지. Kvm extender system
페이지 인쇄To select microphone mode, press 3. The microphone icon is displayed on the screen to confirm your
selection.
The selected input is patched through, via the link cable, to the line-out jack of the transmitter.
Power connection
Each receiver is supplied with a 20 W power adaptor. There is no on/off switch on the unit, so operation begins
as soon as a power adaptor is connected.
Using hotkeys
The LongView™ extenders provide hotkey features to allow you to check and adjust certain aspects of the
operation as follows:
•
Monitor link quality using the dashboard.
•
Choose the preferred link rate mode.
•
Choose between line-in and microphone modes at the receiver.
To use hotkeys:
1. Using a USB keyboard attached to one of the USB A ports on the receiver, press CRTL three times.
The three keyboard indicators will all flash, once per second.
2. Use the numeric keys 1 to 7, located above the main section of the keyboard to select the required
action.
Hotkey Options
Number Icon
Description
1
n/a
Displays the dashboard.
2
Line-in mode for the receiver analog audio input. The line-in icon is displayed for confirmation.
3
Microphone mode for the receiver analog audio input. The microphone icon is displayed for confirmation.
4
Low rate mode for the preferred link speed. The low rate icon is displayed for confirmation.
5
High rate mode for the preferred link speed. The high rate icon is displayed for confirmation.
Balanced mode (available in high rate mode only). Balanced mode allows you to share the available video
6
bandwidth equally between the two video displays, regardless of the EDIDs being reported. The balanced
mode icon is displayed for confirmation
Priority mode (default mode). Video link 1 takes priority allowing it to display resolutions greater than
7
1900x1200 (the limit for the video 2 link). The priority mode icon is displayed for confirmation.
Basic Operation.....7