Aqua Lights AL250MH 설치 및 유지보수 지침 매뉴얼 - 페이지 2
{카테고리_이름} Aqua Lights AL250MH에 대한 설치 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Lights AL250MH 14 페이지. Underwater hull light
페이지 인쇄This underwater light has been carefully designed to provide a versatile product of the highest quality, suitable for a wide range of
underwater applications such as marine, industrial and domestic.
WARNING! Sections in this manual identify safe practice. It is of the utmost importance that this manual is carefully read and
understood. Failure to do so may result in electric shock, injury, fire, or equipment damage. PLEASE READ CAREFULLY and, if in
doubt, seek professional advice.
•
Light source: 250-watt Metal Halide bulb with 4600° K Reflector
•
Lamp replacement: The unit features rear access allowing simple replacement of lamps without removing the fitting
•
Thermal management: The housing has been carefully designed with internal air gap and special venting/convection to direct
heat away from that part of the housing in contact with the boat hull or other mounting surface. The housing locking ring has also
been designed as a heat sink to further dissipate heat effectively away from where it is not wanted.
•
Lamp housing: The lamp housing is manufactured from naval bronze machined to the highest standards.
•
Seals: All the seals are made from high temperature silicone rubber for reliability.
•
Lens: Our lens is made from BoroTrans
•
Installation: The fixture is supplied with user friendly fixing hardware provided. There is a leveling ring supplied to allow fitment
where the inner surface may not be parallel to the outside surface.
Specifications (Fixture & Lamp Assembly)
•
Body: Naval Bronze
•
Lens Bezel: Naval Bronze
Features
for high temperatures and harsh environments.
sm