DeZurik G6 지침 - 페이지 5
{카테고리_이름} DeZurik G6에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DeZurik G6 19 페이지. Cylinder operated actuator used on pec eccentric valves
DeZurik G6에 대해서도 마찬가지입니다: 매뉴얼 (14 페이지)
페이지 인쇄
Adjusting Position Stops
The G-Series Cylinder Actuators have both open and closed position stops. See Figure 2 for
position stop identification.
The position stops are factory set and do not require adjustment unless the actuator has been
disassembled or actuator orientation has been changed.
Adjusting the Open Position Stop
On actuators without booster cylinders, the open position stop is located in the end of the extension cap
opposite the cylinder. On actuators with booster cylinders, the open position stop is located in the end
of the power cylinder. See Figure 2.
1. Open the valve and loosen the Open Position jam nut.
2. Adjust the Open Position set screw to the proper position.
3. Lock the Open Position set screw in place with the jam nut.
August 2012
Cylinder Operated G-Series Actuator
Figure 2 – Position Stops
Page 5
DeZURIK
D10022