Aqua Lung EPG 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Aqua Lung EPG에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Lung EPG 16 페이지. Electronic pressure gauge
페이지 인쇄Set Alarm
1.
Press the left button twice to advance the cursor
over the Alarm Icon.
2.
Press the right button to select.
3.
The cylinder pressure starts to flash (figure 7).
Press the left or right buttons to change the
setting in 10 psi (0.5 bar) increments. When you
reach the desired setting, press both buttons to
accept.
4.
The Air Time starts to flash (figure 8). Press the
left or right buttons to change the setting. Press
both buttons to accept.
5.
The EL (electroluminescent backlight), along with
the word ON or OFF, begins to flash (figure 9).
Press the left or right button to toggle between
ON and OFF. Press both buttons to accept and
return to Standby Mode. If set to ON, the
backlight will automatically come on whenever
any alarm is activated. The backlight will stay on
for 10 seconds.
Note: To turn off any of the alarms, set them to 0. If
there is no button activity for 30 seconds, the gauge
will automatically return to Standby Mode.
Figure 7
Set Pressure
Alarm
Figure 8
Set Air Time
Alarm
Figure 9
Set Automatic
EL backlight
on/off
5