DF ROBOT LeoYan 매뉴얼 - 페이지 9

{카테고리_이름} DF ROBOT LeoYan에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DF ROBOT LeoYan 20 페이지.

Connect your PC with the 4Drawing control with micro-USB cables

7）连接后在 Arduino IDE 中将对应串口进行勾选，若没有相应串口，则需要手工安装驱动，

请参考 http://arduino.cc/en/Guide/Windows#toc4

Check the correspondent serial port within Arduino IDE. If there is no serial port within it,

you will have to install a serial port driver. Click here for reference:

http://arduino.cc/en/Guide/Windows#toc4

8）下载 adjust 程序到控制板

Download the adjust program to the control panel

9）打开 Arduino 串口，能够看到当前的时间的显示，则设置正确，将 RTC 模块取下；否

则重新设置时间。

Open the Arduino serial port and you can see the time displayed on the screen. Then

remove the RTC module or reset the time.

1.2 加载气象站程序 Load the Weather Station Program

CNP a g e

| 9