Aqua Lung apeks XTX 40(DS4) 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Aqua Lung apeks XTX 40(DS4)에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Lung apeks XTX 40(DS4) 20 페이지.

Regulator Owner's Manual

............................................................................................

Status Condition Display Guide

KEY

LO -

SVC -

Note: When using either a DST or FST Status first stage, it will be

necessary to fit the first stage upside down to check its condition.

Once this procedure has been completed the Status first stage

can then be depressurised and rotated into the required position.

Medium pressure too high "DO NOT DIVE!"

Medium pressure too Low "DO NOT DIVE!"

Regulator requires servicing Complete dive,

& ensure the status regulator is inspected

/ serviced by an Authorised Apeks service

technician.

First attach the first

stage to the cylinder

upside down. Then

slowly open the

cylinder valve and

wait for the Status

to display its

condition.

Once the Status has

displayed its condition,

close the cylinder valve

and depressurise the

regulator. Then rotate

the first stage into the

desired position.