Aqua Medic 400.15 운영 매뉴얼 - 페이지 6

{카테고리_이름} Aqua Medic 400.15에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic 400.15 13 페이지.

Available spare parts: Please refer to www.aqua-medic.de.

5. Principle of operation

The aquarium water is pumped to the skimmer using a separate pump (not included) which should have a

capacity of approx. 7,500 - 15,000 litres/hour. Inlet and outlet ports are arranged that way that the air bubbles

have the maximum contact time in the counter-current.

The venturi pump draws water from the skimmer and mixes it with air in the venturi nozzle. The air/water

mixture is pumped back into the skimmer. The treated water flows out of the bottom of the skimmer and is

pumped through the outlet pipe positioned outside the skimmer, back into the aquarium or filter sump.

6. Installation

Check that the sealing rings for the unions are in place.

We recommend a pump with a capacity of 8,000 to 15,000 l/h (2,111 – 3,958 gph) for the water supply.

Note:

1. The valve at the bottom must be closed before you start to fill the skimmer!

2. Ensure the availabilty of a sufficient quantity of usable salt water. The skimmer needs approx. 400 l to be

filled up.

The drain from the skimmer has to run freely into the aquarium. A PVC pipe (110 mm diameter) can be glued

into the drain ports.

Reaction pipe

Injector

Pump

Ball valve

Water inlet

Outlet pipe

Water outlet

Foam cup

Lid

10. Air inlet