Aqua Medic Cubicus CF Qube 운영 매뉴얼 - 페이지 7

{카테고리_이름} Aqua Medic Cubicus CF Qube에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic Cubicus CF Qube 16 페이지.

Thread

Rubber sealing

Slide ring

Nut

There is a blue fitting in the mounted bend of the return line. Here, air is sucked in when the pump in the cabinet

fails. This prevents the formation of communicating pipes and an overflow of the filter tank by returning water.

When starting the aquarium, water has to be filled in until the filter tank is filled up to 10 – 12 cm in the front

part and then the pump has to be started. If the water level in the filter tank decreases, water has to be filled in

until the a.-m. maximum is reached. Take care that enough space is left so that the inflowing water in case of

failure or shutdown of the circulation pump still fits into the filter tank.

Skimmer EVO 500

See separate manual. The skimmer is hooked to the rear wall of the filter sump with the holding unit without

screws (refer to Fig. 1).

Illumination

LED Illumination Qube (see separate manual)

Both Qubes are screwed on the rear panel with the supplied

Operating the aquarium

For operating the Cubicus CF Qube, we recommend our Reef Life series as accessories:



Reef Life Calcium supplies corals with essential calcium and trace elements.



Reef Life Iodine is essential for the care of many corals.

If both additives are applied combined and regularly, they guarantee for successful salt-water aquarist.

We recommend to prepare your sea water with osmosis water in order to minimize from the beginning algae

problems by silicic acids, phosphates and nitrates. Sea-salt of Aqua Medic is formulated from highly purified

compounds. In this way, both products will support you to keep the content of the above-mentioned substances

as low as possible.

The fixing of rocks and corals can easily be done with the underwater adhesive Reef Construct.

Warranty conditions

AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material

and manufacturing defects of the product. Incidentally, the consumer has legal rights; these are not limited by

this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear. The original invoice

or receipt is required as proof of purchase. During the warranty period, we will repair the product for free by

installing new or renewed parts. This warranty only covers material and processing faults that occur when used

as intended. It does not apply to damage caused by transport, improper handling, incorrect installation,

negligence, interference or repairs made by unauthorized persons. In case of a fault with the unit during or

after the warranty period, please contact your dealer. All further steps are clarified between the

dealer and AB Aqua Medic. All complaints and returns that are not sent to us via specialist dealers

cannot be processed. AB Aqua Medic is not liable for consequential damages resulting from the use of any of

our products.

AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany

- Technical changes reserved – 01/2022/v8

bracket.