Biktrix Bafang DPC-18 매뉴얼 - 페이지 2

{카테고리_이름} Biktrix Bafang DPC-18에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Biktrix Bafang DPC-18 9 페이지.

Normal Operation

On/off switch

To turn on the display, press and hold the ON/OFF button. Press and hold the ON/OFF button

again to turn off the display.

If the controls are not operated and the bike is not used for 5 minutes (this time can be set in

"Auto Off") the display will automatically turn off. If the password function of the display is

activated, you will need to input the correct password to enter the normal display interface.

Power assistance level select

With the display powered on, briefly press the LEVEL+ or LEVEL- buttons to switch the level

of power assistance. The lowest level is Level 0, the highest Level 5. When the display is on,

the default mode is Level 1. "Level 0" means no power assistance.

Switch between Distance Mode and Speed Mode

Briefly press the MODE button to switch the display between the distance, speed and other

information. Information will cycle through in the following order: signal-trip distance (TRIP) →

total distance (ODO) → maximum speed (MAX) → average speed (AVG) → remaining

distance (RANGE) → energy consumption (CALORIES) → time (TIME). The energy

consumption unit of CALORIES means kCal.