AVOCOR AVE-8610 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} AVOCOR AVE-8610에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVOCOR AVE-8610 16 페이지.

Enabling the Touch Screen

Before setting up your display to support touch screen capability, ensure that:

The touch screen controller host computer is turned off.

•

The display is turned on.

•

The video output from the computer is connected to a video input on the display.

Connecting the Display to a Host Computer

Connect the signal cable to the display, and then turn on the display.

Connect the USB Cable (USB Type-A connector) to the display.

Connect the other end of USB cable (USB Type-A) to the USB port on the laptop/ PC.

See picture below.

Then turn on the computer.

When USB cable is fully connected, wait for 5 seconds and the touch function is

ready. It can be activated by using the stylus or finger.

v.08_08_2018