Aqua Medic Xenia 65 운영 매뉴얼 - 페이지 8

{카테고리_이름} Aqua Medic Xenia 65에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic Xenia 65 17 페이지.

There is a blue fitting in the mounted bend of the return line. Here, air is sucked in when the pump in the

cabinet fails. This prevents the formation of communicating pipes and an overflow of the filter tank by

returning water.

When starting the aquarium, water has to be filled in until the filter tank is filled up to 10 – 12 cm in the

front part and then the pump has to be started. If the water level in the filter tank decreases, water has

to be filled in until the a.-m. maximum is reached. Take care that enough space is left so that the

inflowing water in case of failure or shutdown of the circulation pump still fits into the filter tank.

The cables of circulation pumps or other parts mounted in the aquarium can be routed through the empty

conduit downwards. If a plug is too big for this, the profile slid onto the rear panel can be cut with a PUK

saw so that cables can be led out of the aquarium at the back. The back side should, however, remain

closed to allow the fan to suck in air in the aquarium and not from the outside. To be able to take the

filter tank out of the cabinet, first of all the cabinet's cover plate between the doors has to be removed

(loosen screws).

Xenia 100/130 and 160 have a mechanical refill for evaporated water.

Fig. 4: Floating gauge for refill

Fig. 5: 1. Canister 2. Tap 3. Hose 4. Feedthrough to the filter tank