Allied Air RGE Series 사용자 정보 설명서 - 페이지 2

{카테고리_이름} Allied Air RGE Series에 대한 사용자 정보 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Air RGE Series 10 페이지. Gas heating/electric cooling package unit
Allied Air RGE Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (14 페이지)

페이지 인쇄

ELECTRICAL SHOCK, FIRE,

OR EXPLOSION HAZARD

Failure to follow the safety warnings exactly

could result in dangerous operation, serious

injury, death, or property damage.

Improper servicing could result in dangerous

operation, serious injury, death, or property

damage.

• Before servicing, disconnect all electrical

power to unit.

• When servicing controls, label all wires prior

to disconnecting. Reconnect wires correctly.

• Verify proper operation after servicing.

For your safety, read the following before operating your

gas heating/electric cooling package unit:

1. The area around the unit must be kept clear and

free of combustible materials, gasoline, and other

flammable vapors and liquids.

2. This unit requires air for combustion and ventilation

to ensure both proper and safe operation.

Combustion air is brought in through the condenser

section. Do not block or obstruct the condenser

coil or condenser fan opening.

Page 2

IMPORTANT SAFETY INFORMATION

WARNING

3. This unit is equipped with an ignition device which

automatically lights the burners. See OPERATING

YOUR UNIT on page 3 for information on lighting

and shutting down the unit.

4. Should the gas supply fail to shut off or if overheating

occurs, shut off the gas valve to the unit before

shutting off the electrical supply.

5. Do not use the unit if any part has been under water.

A flood-damaged unit is extremely dangerous.

Attempts to use the unit can result in fire or

explosion. A qualified service agency should be

contacted to inspect the unit and to replace all gas

controls, control system parts, electrical parts that

have been wet, or the unit if deemed necessary.

6. Examine the unit installation to determine that:

A. All flue gas carrying areas external to the unit,

such as the vent hood, are clear and free of

obstructions.

B. Return air duct connection(s) is physically

sound and sealed to the unit casing.

C. Physical support of the unit is sound without

sagging, cracks, gaps, etc.

D. There are no obvious signs of deterioration of

the unit.

E. Burner flames are in good adjustment (see

Burner Flame beginning on page 6).

7. It is important that you conduct a physical

inspection of the unit at least twice a year. It is

also recommended that the unit should be inspected

by a qualified service agent at least once per year.

Issue 0912

506299-01