Avol AS6000BW 사용자 설명서 - 페이지 11

{카테고리_이름} Avol AS6000BW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avol AS6000BW 15 페이지. Bluetooth soundbar system with wireless subwoofer

페이지 인쇄

User instructions

Pairing a Bluetooth device

4: Select and enable pairing for the 'AS6000BW'

device. If prompted for a password enter '0000'.

5: If pairing is successful the sound bar will beep and

the 'BT' text will stop ﬂashing.

6: If the connected device goes out of range, the

sound bar will attempt to connect for 2 minutes.

When the device comes into range the sound bar

will reconnect again automatically.

7: To remove the paired device using only the sound bar,

press and hold the OPTION button (26) on the remote

control. The 'BT' text will begin ﬂashing again.

Bluetooth status table

'BT' state

Reason

'BT' solid (no ﬂash)

• Connected

'BT' ﬂash

• Auto re-connecting with last

• Pairing mode

Controlling a paired device

Once connected you can either use the controls on the

audio device to begin playback, skip tracks etc.Or you can

use the control buttons on the sound bar & remote.

1: The PLAY/PAUSE button (3 or 21) when pressed wi

begin playback of the selected track on the audio devic

Press again to pause playback.

2: To skip to the next track press the SKIP

or 31).

3: To skip to the previous track press the SKIP

button (4 or 24) .

4: Any further operations must be done from the audio

device.

NOTE: the volume output is effected by the

volume level on the audio source EG: Phone or

laptop, so make sure that is set to about 70-80% (

not too loud to avoid distortion).

Bluetooth notes

• The operation range of bluetooth is approximately 10

meters (30 Feet). Any obstacles in the path between

devices may reduce this range.

• Only one Bluetooth device can be paired at a time.

• Not all Bluetooth devices are compatible.

paired device.

button (4

Play aduio from USB storage devices

Enjoy audio on a USB storage device, such as an

MP3 player and USB flash memory, etc.

What you need

● A USB storage device that is formatted for FAT

file systems, and complies with the Mass Storage

Class.

● An MP3 or WMA file on a USB storage

device

1. Connect a USB storage device to the sound bar.

2. Press SOURCE button (2 Unit or 22 Remote)

repeatedly until USB text appears on display.

-1

3. Select a file you want to play.

Press

Playback

Pause

During playback, press

uring playback, press

Skip to the next/

(4 or 24, 31) to go to the next file or

previous file

to step back to the previous file.

Press

repeatedly, the display will be

Play repeatedly

changed in the following order :

or randomly

→

Note:

• This product may not be compatible with certain types of

USB storage device.

• If you use a USB extension cable, USB HUB, or USB

multi-reader, the USB storage device may not be recognized.

• Digital camera PTP protocols are not supported.

• Do not remove the USB storage device while it is being read.

• DRM-protected music files (MP3, WMA) are not supported.

• Support a USB port: 5V

Do this

(3 Unit or 21 Remote).

(Option) (26 on remote)

(repeat) →

(repeat all)

(random) → (normal).

, 1A.