Avolites Diamond 9 매뉴얼 - 페이지 10

{카테고리_이름} Avolites Diamond 9에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avolites Diamond 9 20 페이지.

Quick Start

P O W E R I N G U P C O N S O L E

P O W E R I N G D O W N C O N S O L E

C O N N E C T I N G E X T E R N A L M O N I T O R S

( B R A C K E T S A N D C L A M P S S O L D S E PA R AT E LY )

C O M PAT I B I L I T Y

1. Unpack the console.

2. Remove the dust cover.

3. Place the device along with the bottom half of the

flight case onto a stable surface (recommended).

4. Using the push down latch raise the back panel.

1. Insert powerCON TRUE1 into the corresponding

jack.

2. Fit console lights.

2. Connect the main power plug.

3. Turn on the red power switch located on rear of

the console. Observe that the mains present neon is

lit

4. Press the power switch located under the arm

rest.

5. Once the software has fully launched and

the show file has loaded, you can then begin

programming.

1. Press the power switch located under the arm rest.

2. Switch off the power button located on the

back and remove powerCON TRUE1 from the

corresponding jack when the console has finished

powering down.

3. Return screen to home position using the push

down back panel.

4. Apply dust cover.

T O E N S U R E T H E C O N S O L E I S R U N N I N G T H E L AT E S T

S O F T WA R E V E R S I O N , P L E A S E V I S I T H T T P S : // W W W. AV O L I T E S .

C O M/S O F T WA R E .

You can enjoy a complete system mounting option

by using the external monitor brackets to mount

additional displays.

To take advantage of this, securely hand-tighten the

provided brackets to the flight case. Place the VESA

bracket in position on the back of the monitor and

attach using the provided screws. Apply and tighten

the monitor clamps to the brackets.

19 to 24-inch monitors weighing between 2.2kg to

5.5kg.

VESA 100 x 100 mm