Aqua Medic CO2 complet 운영 매뉴얼 - 페이지 5

{카테고리_이름} Aqua Medic CO2 complet에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic CO2 complet 8 페이지.

Reactor tube assembly:

1. Attach both suction cups (3)

2. slide output adapter onto water output connection

Hint: The adapter can also be attached to the water output connection with a piece of hose to

lower the position of th unit in the aquarium.

3. Attach filter or circulating pump outlet with a piece of hose to the output adapter

tube. Minimum output for the circulation device through the output adapter is 100 l/h.

4. Attach the black CO

5. Remove the cap (7)

6. Place reactor tube assembly into position

7. Hint: Allow the Reactor tube assembly to completely submerge and fill with water before

pressing the suction cups into position on the aquarium glass.

8. Turn on the circulation pump/filter unit. Warning: close the CO

fig 3: reactor

12. connection hose

Before using the reactor, the rest of the CO

regular has to be mounted on the pressure bottle station. As soon as the regulator and the

reactor have been mounted, the reactor can be adjusted:

tube to the CO

connection.

system has to be assembled: The pressure regulator

hose to prevent water leakage.

fig 4: reactor mounting.

13. minimum water level