Aqua Medic Ocean Light T5 운영 매뉴얼 - 페이지 3

{카테고리_이름} Aqua Medic Ocean Light T5에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic Ocean Light T5 5 페이지. 90 cm 4 x 39 w 6 x 39 w 8 x 39 w 120 cm 4 x 54 w 6 x 54 w 8 x 54 w

페이지 인쇄

4. Installation

The light can be fastened on the aquarium edge with the attached plastic holders or alternatively

with the steel cable at the ceiling.

4.1 Fixing by using the plastic holders

The plastic holders consist of the following different parts:

2 holders incl. hinge (1). These are slid into the rear bar of the light.

2 small holders (2.1). These are slid into the front bar of the light.

2 supports (2.2). These are attached to the aquarium edge.

For assembling, the holders (1) are pushed onto the light in such a way that they can be put on the

aquarium edge. The holders (2.1) and (2.2) are aligned in such a way at the light and/or at the

aquarium that they interlink, if the light is folded down. The holders are shifted that way that the

light rests upon the aquarium symmetrically. Now, the positions at the aquarium edge can be

marked. Then, the holders are taken off the aquarium and glued on the markings by using

Aquaseal. Now, they can be fixed by the Allen screws. After the Aquaseal has dried, the light can

simply be folded in and out for maintenance of the aquarium.

Important: It is absolutely necessary to glue the holders on for safety reasons!

4.2 Suspension by using the steel cable

The cable suspension system provides a neat and simple method of ceiling mounting of

Ocean Light T5 or other suitable lights.

Contents:

The suspension system comprises 2 pcs. of each of the following:

1. ceiling plate with screws and plugs, 2 metre stainless steel cable with stopper

2. light fixing (cable with Y-piece, end bushes and screws)