Aqua Medic SP 3000 Niveaumat 운영 매뉴얼 - 페이지 11

{카테고리_이름} Aqua Medic SP 3000 Niveaumat에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic SP 3000 Niveaumat 18 페이지.

6. Parts List

7. Maintenance

The pump hose and the motor are consumables and have to be maintained and changed regularly.

Pump hose: The pump hose has a lifetime of approx. 3 million turns and after this usage it needs

to be replaced. If the pump is operated continuously, the hose should be changed every 3 – 4

months. We recommend to use an original Aqua Medic spare pump hose only which is supplied

complete with fittings.

Grease: Before the hose is installed, it has to be greased. The pump will only operate properly if

the hose is effectively greased.

Heat: During continuous operation, the motor may heat up as high as 70°C. This is normal and

has no effect on performance or life. However, too little grease on the pump hose may cause

malfunction of the motor and overheating.

Drive wheel with rollers: The plastic drive wheel and the rollers are designed for a long life.

Nevertheless, it may become necessary to change the assembly which should be done the

following way:

Remove the pump hose by pushing the fittings out of the housing. The drive wheel can now be

pulled off the shaft as it is a pressed fitting.

Niveaumat

1. Cover

2. Pump hose with fittings

3. Gland nut

4. Pump housing

5. Drive wheel with rollers

6. Motor

7. Housing

8. Brass pillar (4 pcs.)

9. 12 V~ connection socket

10. Inner back panel

11. Screws, 8 pieces

12. Outer back panel

13. Level sensor incl. retaining

plate

14. Power plug