Aqua Medic Ocean Light LED 운영 매뉴얼 - 페이지 6

{카테고리_이름} Aqua Medic Ocean Light LED에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic Ocean Light LED 19 페이지.
Aqua Medic Ocean Light LED에 대해서도 마찬가지입니다: 운영 매뉴얼 (8 페이지)

페이지 인쇄

1. The display appears as soon as the controller is plugged into an Ocean Light LED or the OK button is pressed.

After pressing the OK button, also the display's lighting is turned on. After five seconds without further

keystroke the lighting turns off again.

The top display shows the mode you're in. 1-User Set/2-User Set = Setting Mode, 1-FixMode/ 2-FixMode =

Fixed Mode.

1. The light is still on when the controller is connected to an Ocean Light LED. The time appears on the display.

2. Press "M" (menu), then four setting options appear:

Time:

for setting the real time

Manual:

for manual adjustment

Fixed Mode:

fixed program of sunrise and sunset

Setting Mode: An automatic program according to the user's needs can be adjusted.

3. Press the "M"-button (menu) again to choose "Time", "Manual", "Fixed Mode" or "Setting Mode". Press "OK"

to confirm the selected version chosen by the +/- buttons.

4. First of all, set the real time. Use "+" or "-" to move cursor to choose "Time", press "OK" to enter the setting.

Then use "+" or "-" to adjust the real time and press "OK" to confirm.

5. Following settings are possible in the menu "Manual":

Line 1: for white LEDs

Line 2: for blue (Ocean Light LED) or warm colours (ECOplant LED) LEDs

000%: You can set the brightness from 1% to 100%, 0% means brightness off.

ON:

switch on or off

Press "+" or "–" to select line 1 or 2 and confirm by "OK". The cursor will go to the chosen position. Press "M"

to move to the next step for setting and press "OK" to confirm.

6. Following settings are possible in the menu "Fixed Mode":

If ON was chosen and confirmed by OK, then the light turns on automatically according to the following schedule:

White channel (1)

09:00 to 09:30, 0% to 100%

09:30 to 20:00, 100% to 100%

20:00 to 20:30, 100% to 0%

20:30 to 09:00, 0% to 0%

Blue warm colours channel (2)

08:30 to 09:00, 5% to 100%

09:00 to 20:30, 100% to 100%

20:30 to 21:00, 100% to 5%

21:00 to 08:30, 5% to 5%

Choose the "Setting Mode" and press "OK" to confirm.

7. Choose channel 1 or channel 2 (1 is for white, 2 is for blue or warm colours).

There are five programs in the Setting Mode:

00:00 to 00:00 for time period setting

000% to 000% for adjustment of the brightness

For example: If you set 6:00 to 6:30, 0% to 100%, then the light will light up from 6:00 and in 30 minutes will

go up to 100% brightness. This means that the brightness will increase about 3.33 % every minute. At 6:30,

100% are reached.