Allied Healthcare VACUTRON CONTINUOUS-INTERMITTENT 운영 및 유지보수 매뉴얼 - 페이지 6
{카테고리_이름} Allied Healthcare VACUTRON CONTINUOUS-INTERMITTENT에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Healthcare VACUTRON CONTINUOUS-INTERMITTENT 16 페이지. Vacuum regulators for continuous or intermittent drainage
페이지 인쇄
3.0
ASSEMBLY AND SET-UP:
The Vacutron suction regulator can be used with reusable or disposable suction canisters. A wide variety of suction
systems can be configured, depending on the specific configuration of the suction regulator and the canister.
Generally speaking, the Vacutron suction regulator should be connected to the vacuum source via the connection on the
rear of the unit. A suction canister connects to the bottom of the Vacutron regulator either directly or through a hose.
Some typical suction systems are shown in Figures 1 and 2.
CAUTION
CAUTION
WARNING
Figures 1 & 2
DO NOT DIRECTLY ATTACH A COLLECTION BOTTLE LARGER THAN ½
GALLON (2 LITERS) UNDER THE UNIT. THE WEIGHT OF FULL BOTTLES
LARGER THAN ½ GALLON PUTS AN UNDUE LOAD ON THE WALL OUTLET.
IF YOU ARE NOT SURE HOW TO CONNECT OR USE YOUR VACUTRON
SUCTION REGULATOR, CONSULT THE FACTORY FOR SPECIFIC
INSTRUCTIONS.
CHECK THAT THE VACUUM LEVEL IS AT THE DESIRED SETTING PRIOR
TO USING YOUR VACUTRON SUCTION REGULATOR.
6