2VV STANDESSE 조립, 설치 및 작동 지침 - 페이지 5
{카테고리_이름} 2VV STANDESSE에 대한 조립, 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 2VV STANDESSE 11 페이지. Basic control
페이지 인쇄
2. EXTERNAL ACCESSORIES
2.1 CONNECTING EXTERNAL ACCESSORIES
PLEASE NOTE
The unit must be disconnected from the power supply to connect accessories.
•
All external control components must be connected according to the wiring diagram.
•
The connectors must be connected to the electrical board with adequate force and always perpendicular to the base.
•
2.1-1 DS door contact
TECHNICAL INFORMATION
– suitable for all BASIC regulation
- Isolated break contact with maximum voltage 230V, 6A
- IP67, can be connected as a break or switching contact
Connectors for control modules: DS / DS
CAUTION!
Not included with the product.
2.1-3 Thermostatic valve – TV1/1
TECHNICAL INFORMATION
– Thermostatic valve to regulate the water exchanger
– Suitable for all types of curtain with water exchanger
– Operates independent to the BASIC controls.
CAUTION!
Not included with the product.
2.1-4 Zone valve ZV / RT-3-xx
TECHNICAL INFORMATION
– Zone valve to regulate the water exchanger
– Cable - Three-core cable with a cross-section of 1.5 mm
CAUTION!
Not included with the product.
2.1-5 Room thermostat - TER-P
Room thermostat -TER-P
- Room thermostat to regulate heating
– Cable - Two-core cable with a cross-section of 1,5 mm
Connectors for control modules: Th / Th
ATTENTION!
Not included with the product.
2VV. Creating innovative solutions for you and your business since 1995.
ver.2 15-01-20
, 230 V/
2
, 230 V/ 50 Hz.
2
50 Hz.
5