CP Electronics EBMHS series 제품 설명서
{카테고리_이름} CP Electronics EBMHS series에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics EBMHS series 12 페이지. Miniature hs pir presence detector (standalone)
Product Guide
EBMHS
Miniature HS PIR Presence Detector (standalone)
Sensor head
Standard power supply
The EBMHS series of miniature PIR (passive infrared)
presence detectors provide automatic control of lighting
loads with optional manual control.
The unit detects movement using a PIR sensor and turns
the load on. When an area is no longer occupied the load
will switch off after an adjustable time out period.
These units come complete with clips allowing unobtrusive
flush mounting into ceiling tiles or solid ceilings.
All functionality is fully programmable using an IR handset.
PIR Sensor
Detects movement within the unit's detection range,
allowing load control in response to changes in occupancy.
IR Receiver
PIR lens
Receives control and programming commands from an
IR (infrared) handset.
IR Receiver
Light Level Sensor
Light Level Sensor
Status LED
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
RJ11 connector
The sensor head has a flying lead with a RJ11 plug at the
end plugs into the RJ11 socket on the power supply.
Power supply
This power supply has a 6A relay. It also has connections
for an external switch that can be used to turn on the load
when absence detection mode has been set or raised /
lowered with dimming variants.
Overview
Features