Aqua One 103F 사용 설명서 - 페이지 6

{카테고리_이름} Aqua One 103F에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua One 103F 13 페이지. 100 series maxi internal filters

Maintenance 101/102F

1. Unplug from the power supply. Take to sink.

2. Remove the sponge casing from motor to access the

filter sponge. (102F has 2)

3. Remove sponge and squeeze gently a few times in

a bucket of aquarium water. It is important to not wash

the sponge too thoroughly and never wash it in tap

water.

If you have a 102F only wash one sponge at a time

and rotate them. This will help keep your filter working

better.

Clean the impeller at least once a month.

1. Grasp the motor with one hand and filter casing with

the other and gently pull apart.

2. Remove the impeller cover to gain access to the

impeller.

3. Pull impeller from the motor and rinse properly. Use

an Aqua One double ended pipe brush to clean the

impeller and the impeller well and also any of the outlet

options that are being used.

4. Put the filter back together and return to the aquarium.

Ensure your hand is not wet, plug in at the power supply

and turn on.