Aqua One AQUIS 700 사용 설명서 - 페이지 6

{카테고리_이름} Aqua One AQUIS 700에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua One AQUIS 700 17 페이지. Canister filters

Set Up Instructions

1. Remove the 2 boxed accessory packs and

the filter unit from the box.

2. Open the filter unit. To do this release the 4

clips located on the corners of the filter. Fig 1

3. Lift the head unit off the canister body. Place

it somewhere safe where it will not be stepped

on or broken. Fig 2

4. Take the canister body to the sink. Ensure

the area is clean and free from detergents.

5. Remove the filter grid and the filter media

baskets from the canister. Fig 3

6. Follow the filter media setup instructions on

the previous page which apply to your filter.

Remember to remove all media from the plastic

bags and rinse in tap water to remove excess

dust. The simplest way to do this is empty the

correct media into its basket and run tap water

through it. Rinse the inside of the canister body

in tap water also, remember DO NOT USE ANY

SOAPS OR DETERGENTS. Fig 4

Fig 1

7. Once all the filter media and the canister has

been washed and the sponges have been

inserted into the filter baskets place the filter

media baskets in the correct order (Refer to

previous page) back into the canister body.

Ensure the filter inlet pipe has the black sealing

O-ring at the top of it and that the baskets sit flat

on top of each other. The sealing O-ring on the

top filter basket is attached to the bottom of the

head unit. Fig 5

Fig 2

8. Ensure the filter grid is then placed back on

top of the last filter basket. This is very impor-

tant. Fig 6

Fig 3

Fig 4

Fig 5