CP Electronics MWS6-PRM-LV 제품 설명서 - 페이지 4

{카테고리_이름} CP Electronics MWS6-PRM-LV에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS6-PRM-LV 8 페이지. Ceiling microwave presence/absence detector 12-24v ac/dc
CP Electronics MWS6-PRM-LV에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄

Installation

The MWS6-PRM-LV is designed to be mounted using either:



Flush fixing, or



Surface fixing, using the optional Surface Mounting Box (part no. DBB).

Both methods are illustrated below.

Flush Fixing

Warning - be careful

bending springs when

mounting unit.

Surface Fixing

Wire stripping details

Readback function

The UNLCDHS has the ability to read back the settings stored in a device.

To read back individual parameters



Navigate to the parameter and press the 'R' (Read) button whilst pointing at the device. The handset will click

when the parameter has been read back, the device will flash its LED, and the value will be shown against the

parameter in the menu.

To read back all of the parameters in a menu



Press and hold the 'R' (Read) button for more than 1 second.



The handset will click every time a parameter is received



The device will show multiple flashes of its LED



All of the values will be shown against the parameters in the menu.



The individual parameters may be edited and then saved as a 'Macro'.

Notes



If a parameter(s) has been missed because of a communication error, the missing value(s) is replaced by dashes.



When reading back, the Channel 1 relay (where fitted) will temporarily be switched off, and will return to it's

normal state 2 seconds after the read back has been completed.

Hole Ø64mm

50mm or 60mm fixing centres

(UNLCDHS handset only)

Pull out spring tab and rotate

spring arm as shown

Important

Ensure that the cables are formed as shown

before affixing the cable clamp. The clamp

MUST clamp the outer sheath(s) only.

Bend cores as shown.