Avonic AV-CV150 사용자 설명서 - 페이지 4

{카테고리_이름} Avonic AV-CV150에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avonic AV-CV150 6 페이지. 3g sdi to hdmi converter

Features

•

Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s

•

Support SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M, SMPTE 259M-C

•

Equalized and re-clocked loop output• Integrated audio de-embedder for a maximum of 8

channel, 48 kHz audio

•

Auto video mode detection (3G/SD/HD)

•

Conversion from SMPTE 425M level B to Level A 1080p 50/59.94/60 4:2:2 10-bit

•

Connect with other units to extend your signal over long distances

•

Display with SDI and HDMI signals simultaneously .

•

Support signal transmission distances of up to 300M for SD-SDI signals, 200M for HD-SDI

signals and 100M for 3G-SDI signals

DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The

red LED will turn on when the power is on.

Power LED: This red LED will switch on when the device is connected with the power supply.

HDMI OUT: This slot is where you connect a HDMI / DVI display with a HDMI or HDMI to DVI cable.

LOOP OUT: This slot is where you connect with SDI source, In order to send a SDI signal to a

display.

INPUT: This slot is where you connect the SDI display with an SDI cable for displaying images.

Connect it to another SDI to HDMI converter/ extender to extend your signal or connect to

multiple displays.