CP Electronics MWS5 제품 설명서 - 페이지 4

{카테고리_이름} CP Electronics MWS5에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS5 12 페이지. Miniature ceiling mounted microwave presence detector

2. Dimensions & Mounting options cont.

Flush fitting behind light fitting diffuser using the flange mount bracket

Glue the flange mount bracket on to the rear of the diffuser, and fasten the sensor head in place using the

two longer (19mm high) bracket clips.

Before gluing, please ensure that the glue used is compatible with both the acrylic flange mount bracket

and the diffuser material.

Flush fitting the sensor head behind a diffuser

using the flange bracket

Flush fitting through gear tray or metal bulkhead using the flange mount bracket

Cut a 37.5mm diameter hole in the bulkhead plate (max. 1mm thick) to allow the front face of the sensor

head to pass through.

Glue the flange mount bracket on to the rear of the plate, and fasten the sensor head in place using the

two shorter (18mm high) bracket clips.

Before gluing, please ensure that the glue used is compatible with both the acrylic flange mount bracket

and the gear tray / bulkhead material.

Flush fitting the sensor head through a panel

using the flange bracket

page 4