Aqua One Aqience 1000 R 사용 설명서 - 페이지 8

{카테고리_이름} Aqua One Aqience 1000 R에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua One Aqience 1000 R 10 페이지.

Lighting Maintenance

Light tubes (please read the general electrical

safety instructions before installing the lights,

ﬁ lter or heater) Your new aquarium uses standard

tubes (supplied). They are available as replacement

parts from your local Aqua One dealer. Light tubes

are not covered by the guarantee. Life expectancy

is generally 10 months or more, however tubes

loose their output gradually over time. To maintain

the health of plant and aquatic life effected by the

amount of light available we suggest changing

them every 6 months.

Locating the lights

Positioning of lights on aquarium (note some

models have twin light units). The black end caps

have brackets which slide over the aquarium trim.

Please ensure light unit is ﬁ rmly in place before

switching on. The black hood covers help secure

the lights in place.

Removing Light Tubes

Switch light off, remove from mains supply and

tank before disassembly of lights at any time.

Unscrew the white end caps of the tube holders

by turning anti clockwise (1). Both caps should

be removed before the tube is slid out. Keep end

caps as these are required for re-installing (2).

Installing new tubes

With the light unit unplugged and removed from

the tank, slide the end caps over the tube both

ends (1). Gently slide the tube pins into the end

cap receptacles (3). Fully tighten the caps back

on their threads (4). Be careful not to cross thread

as this is a water tight seal. Only use hand tight.

Ensure they are fully tightened. Test before re-

installing on to the tank.