CP Electronics DD-LCDHS 제품 설명서
{카테고리_이름} CP Electronics DD-LCDHS에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics DD-LCDHS 8 페이지.
페이지 인쇄DD-LCDHS
Direct Dim, PRM and MWS7 Handset
Section
Contents
1
Description and operation
2
LCD Navigation
3
4
5
6
7
8
9
Product Guide
The DD-LCD-HS is the programming tool for all products in the -DD
(Direct Dim), -PRM (PRM) and MWS7 ranges.
On button
To turn the unit on press the „on" button. This button is also used for
selecting parameters and then sending to the device being
programmed.
Up, down. Left and right buttons
Use to navigate through the menus. The up and down buttons are
also used for selecting values or toggling between on / off, yes / no
etc.
To turn the unit off, either select the final main menu item or the unit
will turn off after 30 seconds.
Menu selection
Use the < > buttons to scroll through the menus. Press „on" to select.
Parameter selection
Use the < > buttons to scroll through the menus. Press „on" to select
menu. Use the up and down buttons to select values or toggle
between on / off, yes / no. Press „on" to send parameter to device.
1. Description and Operation
2. LCD Navigation
Contents
Page
1
1
2
3
4
5
6
7
8