CP Electronics AR-SG-4SM-W 제품 설명서 - 페이지 2
{카테고리_이름} CP Electronics AR-SG-4SM-W에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics AR-SG-4SM-W 13 페이지. The ar-sg-4sm-w is a stylish push-button wall plate that provides control of an an-10 system.
페이지 인쇄Installation
Remove front cover by using a flathead screwdriver or similar to gently prise off
the cover.
Backbox Compatibility
The AR-SG-4SM-W is designed to fit both UK and EU
style backboxes.
BS4662 square back box
Activation
Unit will initially be in deep sleep mode. This is to preserve the battery. To activate, press and hold the centre button for
more than 1 sec to bring unit out of deep sleep. It is indicated by the LED ring flashing.
Optional 12Vdc supply wiring diagram
12VDC
+ -
USB connection
When connected to micro USB port, the LED ring turns on to indicate connection.
2
DIN standard round back box
Micro USB socket
Mounting
Use the extender if there is less than 25mm free space.
Note: put the wires through the extender before
connecting
25mm
Do not over tighten