Aqua One Betta Oasis 빠른 시작 매뉴얼 - 페이지 14
{카테고리_이름} Aqua One Betta Oasis에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua One Betta Oasis 16 페이지.
페이지 인쇄FILTER
FILTER
S
S
W W
F F
LOW
LOW
ATER
ATER
LOW
LOW
Check and clean
intake strainer
and spray bar.
Diagnosing Pump Problems
Diagnosing Pump Problems
Impeller Well
Magnet
Check both the impeller magnet and the
inside of the impeller well for damage. The
surfaces should feel smooth. If not, they are
damaged (most likely by substrate entering
the pump) and the pump will not work at full
efficiency or at all.
New
Check the centre hole in the impeller. As it
wears, the hole will develop an oval shape.
If this is noticed, the impeller should be
replaced.
Impellers are a wearing consumable item
and therefore not covered by the guarantee.
Troubleshooting cont.
Media or pump
are dirty. Clean
filter and pump.
If you are having problems with the pump, follow these
If you are having problems with the pump, follow these
steps to help diagnose the problem. Most common pump
steps to help diagnose the problem. Most common pump
problems can be found by following these steps.
problems can be found by following these steps.
Worn
N
N
W W
F F
O O
ATER
ATER
LOW
LOW
Check that power
is available
and connected
The blade section on the impeller should
not be able to turn in relation to the
magnet. If it spins freely or at all, the
impeller should be replaced.
To test the electric coil in the pump,
remove the impeller. Plug the pump in
(ensure everything is dry first!) and hold
the impeller magnet next to the pump as
shown. You should feel the magnet vibrate.
14
Pump is clogged.
Clean powerhead.