Billi Quadra 사용자 설명서 - 페이지 8

{카테고리_이름} Billi Quadra에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Billi Quadra 13 페이지. Xl, xt, xr tap options
Billi Quadra에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 사용자 설명서 (12 페이지), 설치 매뉴얼 (7 페이지)

페이지 인쇄

User guide

Billi Quadra & Quadra Sparkling Plus – XL.

Filter removal and

replacement instructions

Important note: Please ensure you remove the

foam packing under the filter before installing .

1 . Remove the front panel .

2 . Place the unit in Holiday Mode by

pressing the Pressure Relief button once .

The lights on the dispenser will alternate

and then go off

3 . Hold filter and swing towards you slowly .

The top of the filter is in a hinged cradle

assembly . It should stop after approximately

30 degrees of travel .

4 . The filter can now be released from the

holding cradle by pulling down on the filter .

5 . Take care not to spill water in the base of the

tray . If so wipe gently with absorbent paper .

6 . Install new filter into the same location

by pushing all the way up into the cradle .

7 . Push filter back into the unit until it locks

into place . Power light should come back on .

8 . Flush chilled side until water flow stops .

Wait 10 minutes .

Repeat these steps 2 times .

9 . Check for any leaks from around the

filter, hosing or pipeworks .

10 . Replace the front cover .