Allied Systems LONG REACH CCHA 설치 유지보수 및 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Allied Systems LONG REACH CCHA에 대한 설치 유지보수 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Systems LONG REACH CCHA 19 페이지. Carton clamp with load stabilizer

페이지 인쇄

3.1 Safety Information

Safety is Everyone's Responsibility

Whether you are new on the job or a seasoned veteran,

these safety tips may prevent injury to you, to others, or

to the materials you are handling. Always be alert, watch

out for others, and follow these suggestions:

Attachments handle material, not people.

Safety starts with common sense, good

judgement, properly maintained equip-

ment, careful operation, and properly

trained operators.

The safety instructions and warnings, as documented

in this manual and shipped with the machine, provide

the most reliable procedures for the safe operation and

maintenance of your Long Reach attachment. It's your

responsibility to see that they are carried out.

3.2 Safety Regulations

Know your company's safety rules. Some companies

have site-specific directions and procedures. The

methods outlined in your operator's manual provide a

basis for safe operation of the machine. Because of

special conditions, your company's material handling

procedures may be somewhat different from those

shown in this manual.

3.3 Safety Symbols

The following terms define the various precautions and

notices:

DANGER

Indicates a hazardous situation which, if

not avoided, will result in death or serious

injury. Carefully read the message that

follows to prevent serious injury or death.

WARNING

Indicates a hazardous situation which,

if not avoided, could result in death or

serious injury. Carefully read the message

that follows to prevent serious injury or

death.

45-034, REV. 5/18

SECTION 3 SAFETY SUMMARY

3.4 Labeling

• Change capacity, operation, and maintenance

3.5 Training

• Make sure all operators are trained in the fork and

• Know the mechanical limitations of your forklift.

CAUTION

Indicates a hazardous situation which,

if not avoided, could result in minor or

moderate injury, or equipment damage or

void the machine warranty. Carefully read

the message that follows to prevent minor

or moderate injury.

Notice

Describes information that is useful but

not safety related.

WARNING

Multiple hazards.

Ignoring safety warnings may cause equip-

ment damage, personal injury or death.

All possible safety hazards cannot be

foreseen and included in this manual. The

operator must always be alert to possible

hazards that could endanger personnel or

damage the equipment.

instruction plates, tags, or decals when a forklift

truck is equipped with an attachment. If the truck

is equipped with front-end attachments other than

factory installed attachments, truck must be marked

to identify the attachments and show the approxi-

mate weight of the truck and attachment combination

at maximum elevation with load laterally centered.

attachment adaptation, operation, and use limita-

tions. Retrain an operator if a new attachment is

added to the forklift. Consult the operator's manual

for instructions on how to use the new equipment.