CP Plus CP-UNR-4K2161-V2 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} CP Plus CP-UNR-4K2161-V2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Plus CP-UNR-4K2161-V2 20 페이지.

3. HDD Installation

This series NVR has only one SATA HDD. Please use HDD of 7200rpm or higher.

Please follow the instructions below to install hard disk.

All figures listed here are for reference only.

1. Loosen the screws of the

rear panel and side panel.

4. Turn the device upside down and

then turn the screws in firmaly

7. Put the cover in accordance with the

clip and then place the upper cover back.

2. Fix four screws in the HDD

(Turn just three rounds).

Fix the HDD firmly.

8. Secure the screws in the rear

panel and the side panel.

3. Place the HDD in accordance with

the four holes in the bottom.

6. Connect the HDD cable and

power cable.