Allied Telesis AT-8000S/16 데이터시트

{카테고리_이름} Allied Telesis AT-8000S/16에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-8000S/16 3 페이지. Layer 2 managed fast ethernet switch

페이지 인쇄

Datasheet |

Switches

AT -8000S/16

Layer 2 Managed Fast Ethernet Switch

AT -8000S/16

16 port standalone 10/100TX Layer 2 switch

with 1 active SFP bay (unpopulated) and 1

standby 10/100/1000T port (RJ-45)

Overview

The small form factor AT-8000S/16 provides

line-rate Layer 2 switching in an affordable,

fixed-configuration platform. Featuring easy

installation and exceptional reliability, this

10/100 switch comes with one Gigabit uplink

port with the option of the integrated copper

10/100/1000 port or a 100 or 1000 SFP slot

for fiber connectivity.

Ideal Workgroup and

Remote Office Connectivity

Designed for the smaller workgroup or remote

office this highly featured switch mirrors the

advanced feature set of the larger 8000S series

stackable products while offering the benefits of

silent operation and a port density aimed at

right priced functionality.

Easy Access Networking

Featuring an industry standard CLI and Allied

Telesis' intuitive yet fully featured Web interface

the advanced features of the AT-8000S/16 are

accessible to a wide range of system

administrators. The well known CLI and Web

interfaces significantly reduce learning time and

minimize the cost of deployment.

Allied Telesis

Secure Management

Only authorized administrators can access the

management interface of the 8000S series.

Protocols such as SSL, SSH and SNMP v3

facilitate this protection of your network with

local or remote connections.

Securing the Network Edge

To ensure the protection of your data, it is

important to control access to your network.

Protocols such as IEEE 802.1x port-based

authentication guarantee that only known users

are connected to the network. Unknown users

who physically connect can be isolated to a

pre-determined part of your network offering

guests such benefits as Internet access while

ensuring the integrity of your private network

data.

Gigabit and Fast Ethernet SFP

Support

All switches in the 8000S family support both

Gigabit and Fast Ethernet Small Form-factor

Pluggables (SFPs).This makes the 8000S series

an ideal family for environments where Gigabit

fiber switches will be phased in over time.The

8000S family allows for connectivity to the

legacy 100FX hardware until it is upgraded to

Gigabit. Support for both speeds of SFPs allows

organizations to stay within budget as they

migrate to faster technologies.

Key Features

Easy,Well Known Management

•

Industry standard CLI

•

Simple intuitive, full featured Allied Telesis

Web interface

•

Secure encrypted Web and CLI management

with SSH v2 and SSL

•

SNMP

All the QoS Needed in the Wiring Closet

for Today's Voice and Data Networking

•

Eight priorities assigned to four queues

•

IEEE 802.1p for Layer 2 QoS

•

DSCP (DiffServ) for Layer 3 QoS

•

IEEE 802.1p to DSCP remarking traffic ready for

transport to the Layer 3 core of the network

Securing the Network at its Most

Vulnerable Point

•

IEEE 802.1x and RADIUS network login: for

advanced control of user authentication and

accountability

•

Guest VLAN: to ensure visitors or unauthorized

users connect only to services defined by IT. E.g.

Internet

•

TACACS+: for ease of management security

administration

Small Form Factor

•

Standalone switch for remote locations

or where stacking is not required

•

Silent operation (fanless)