DFI EC500-SD 설치 매뉴얼 - 페이지 6
{카테고리_이름} DFI EC500-SD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI EC500-SD 10 페이지.
페이지 인쇄
Installing a 2.5" SATA Drive
1.
Before installing the SATA drive, connect the SATA data and power cable to the SATA data
connector of the SATA drive. Then install the SATA drive on the HDD bracket with the provided
mounting screws from the HDD drive bay kit.
Mounting Screws
2.
Place the SATA drive installed with the HDD bracket in the system. Align the mounting
holes on the HDD bracket with the mounting holes on the drive bay and use the provided
mounting screws to secure the drive in place.
Mounting Screws
Mounting hole
Mounting screw
SATA data and power cable
6