DFI EC70A-SU 설치 매뉴얼 - 페이지 2
{카테고리_이름} DFI EC70A-SU에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI EC70A-SU 5 페이지.
페이지 인쇄
Installing a 2.5" SATA Drive
1. Remove the two screws securing the chassis cover and lift the cover to open the system.
2. Locate the SATA drive bay on the system board. Remove 4 mounting screws that secure the drive
bay to the system board.
SATA connector
SATA drive bay
SATA drive bay
3. Align the mounting holes of a SATA drive with the mounting holes on the drive bay and connect the
SATA cable (data and power) to the 2.5" SATA drive. Then, use the provided HDD mounting screws
to affi x the HDD to the drive bay.
Mounting screws
2
Chassis screw
SATA power connector
Mounting screw