DFI EC70B-SU 설치 매뉴얼 - 페이지 3

{카테고리_이름} DFI EC70B-SU에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI EC70B-SU 5 페이지.

Installing an M.2 card

The system is equipped with one M.2 socket (SATA signals) and supports 42mm,

60mm and 80mm M.2 SSDs.

To install an 80mm M.2 SSD:

1. Align the notch at the edge of the M.2 card with the key in the connector.

2. Insert the M.2 card into the connector.

3. Use the provided mounting screw to secure the card on the system board.

To install a 42mm or 60mm M.2 SSD:

1. Install the standoff at the 42mm or 60mm mounting position.

2. Align the notch at the edge of the M.2 card with the key in the connector.

3. Insert the M.2 card into the connector.

4. Use the provided mounting screw to secure the card on the system board.

Standoff

M.2 card