AVPro Edge AC-CONVERT-HDDP 사용자 설명서 - 페이지 7

{카테고리_이름} AVPro Edge AC-CONVERT-HDDP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVPro Edge AC-CONVERT-HDDP 8 페이지. Hdmi 2.0 to displayport 1.2a converter 1x2
AVPro Edge AC-CONVERT-HDDP에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

AC-CONVERT-HDDP

Maintenance

Maintenance
 
To ensure reliable operation of this product as well as protecting the safety of any person
To ensure reliable operation of this product as well as protecting the safety of any person
using or handling this device while powered, please observe the following instructions.
using or handling this device while powered, please observe the following instructions.
• Use the power supply provided. If an alternate supply is required, check voltage,
polarity and that it has sufficient power to supply the device it's connect to.
• Do not operate these products outside the specified temperature and humidity range
given in the above specifications.
• Ensure there is adequate ventilation to allow this product to operate efficiently.
• Repair of the equipment should only be carried out by qualified professionals as these
products contain sensitive components that may be damaged by any mistreatment.
• Only use this product in a dry environment. Do not allow any liquids or harmful
chemicals to come into contact with these products.
• Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to
clean this unit.

Damage Requiring Service

• The DC power supply cord or AC adapter has been damaged
• Object or liquids have gotten into the unit
• The unit has been exposed to rain
• The unit does not operate normally or exhibits a marked change in performance
• The Unit has been dropped or the housing damaged
Support
Should you experience any problems while using this product, first, refer to the
Troubleshooting section of this manual before contacting Technical Support. When calling, the
following information should be provided:
• Product name and model number
• Product serial number
• Details of the issue and any conditions under which the issue is occurring
Page 7