AVPro Edge AC-CXWP-VGA-T 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} AVPro Edge AC-CXWP-VGA-T에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVPro Edge AC-CXWP-VGA-T 4 페이지. Wall plate transmitters
페이지 인쇄Input Switching:
Each wall plate utilizes auto sensing technology. This means once a source is connected
the wall plate will recognize the connection and automatically send the signal to the
display.
For the VGA and MDP wall plate: if you already have a source plugged into the wall plate
and you plug in another source the wall plate will automatically switch to the source
that was just put in.
If you have 2 sources plugged into the VGA/MDP wall plate you can switch between the
inputs by pressing the square lit up button. A green light indicates that MDP/VGA is being
used and an amber colored light indicates that HDMI is selected.
If the active source is unplugged it will automatically switch to the other plugged in
source.
EDID Management:
EDID management allows you to manage the input device (typically the display) to request
specific video resolutions and/or audio codecs from a source. EDID can be toggled using
the turn dial (Located on bottom of unit opposite of HDBT port).
Use a flathead screwdriver to toggle between different preset EDIDs by twisting the dial
to the preferred EDID. The following choices are available:
0.
4K60HZ 420 3D 2Ch [Default]
1.
4K60HZ 420 3D 4CH
2.
4K60HZ 420 3D 8CH
3.
4K60HZ 420 HDR BT2020 3D 2Ch
4.
4K60HZ 420 HDR BT2020 3D 6Ch
5.
4K60HZ 420 HDR BT2020 3D 8Ch
6.
4K30HZ RGB 3D 2CH
7.
4K30HZ 444 3D 6CH
8.
4K30HZ 444 3D 8CH
9.
4K30HZ 444HDR BT2020 3D 2CH
A.
4K30HZ 444HDR BT2020 3D 6CH
B.
4K30HZ 444HDR BT2020 3D 8CH
C.
1080P60 RGB 8 BIT 3D 2CH
D.
1080P60 444 3D 6CH
E.
1080P60 444 3D 8CH
F.
Copy from output